performance is needed.
For a century, Ingersoll Rand T30 series piston air compressors have been renowned for its superior quality in the
compressor market. It is the same with HP air compressor unit. These air-cooled multi-stage compressors using splash
lubrication have a motor power range of 15-20 HP and a designed pressure range of 300psig to 6,000psig. This T30 series
are your optimal choice when a high pressure air system with low operating cost and outstanding performance is needed.
HP reciprocating compressors are widely applied in various industrial sectors, and play a key role in the fast-growing electric
power industry as HP compressed air is necessary for airflow system in the high voltage circuit breaker, gas turbine and
power generator start, and governor hydraulic system in hydropower station.
Ingersoll Rand 15T2 and H15T2 HP air compressors are specifically designed for the electric power industry commonly as
the best HP air compressor choice worldwide.
Heavy duty cast iron cylinder
Low oil level switch
Inter-stage safety valve & pressure gauge
Discharge check valve & safety valve
Automatic drain trap mounted in inter-stage drain pipe
Efficient TEFC motor, IP55, 1.15 S.F
Heavy steel base
Enclosed metal guard
V-belt drive
HP switch (delivered at random)
Magnetic starter (delivered at random)
15-20HP, star delta start, constant speed control
Filled with xL740HT synthetic lubricant before leaving the factory
HP compressed air plays a key role in making plastic bottles, cans and containers for food, beverage, pharmaceutical and
other industries. Ingersoll Rand T-30 “PETAIR” HP air compressor with multiple compression stages is specifically designed
to provide HP compressed air for blow molding process, e.g. blowing PET bottles or cans. Ingersoll Rand “PETAIR” is
generally considered as the optimal HP air compressor by the world’s leading OEMs in PET industry. “PETAIR” is available
as single unit or skid mounted multi-unit to meet your specific demands.
Cast iron structure - cylinder and crank case is made of 100% cast iron
material to guarantee long service life of the unit.
Cylinder - individually cast cylinder with deep radial fins can remove the heat
generated by the compressed air in 360 degrees. Cylinder and crank case is
bolted for ease of routine repair and maintenance.
Centrifugal unloading device - it prevents overload of the unit by
automatically releasing the air from intercooler and cylinder.
Intercooler - the finned tube intercooler is directly installed at the air blowing
point of the flywheel.
After-cooler - like the intercooler, the finned tube air-cooled after-cooler is
also installed at the air blowing point of the flywheel. The temperature of
compressed air discharged from the after-cooler is about 20℃ higher than
the ambient temperature.
Flywheel - the flywheel blades generate a “whirlwind” airflow to cool the cylinder with deep radial fins, intercooler and
after-cooler.
Motor -TEFC, IP55 motor, 1,500 rpm, 1.15 S.F
Drive - V-belt drive and enclosed metal guard ensures smooth operation.
Base - a small groove is made on the heavy steel base, so that the motor can be moved to tighten the V-belt.
Regulation - all HP units have auto start / stop control function, and optional constant speed control and dual control.
