How can we help you?

Atlas Copco Desiccant Dryer

Atlas Copco Desiccant Dryer

Atlas Copco Desiccant Dryer

Atlas Copco Desiccant Dryer
Meet your specific requirements
Atlas Copco desiccant dryers offer the right air quality for your application
with pressure dew points as low as -70°C/-100°F or ISO Class [-:1:-].

Set new quality standards
Tested according to ISO 7183:2007, Atlas Copco
desiccant dryers meet and often exceed international
standards for compressed air purity.
Naturally, all our dryers provide full protection of
electrical components, controls and displays

Contact

Atlas Copco Desiccant Dryer
 

Related Products
Small mobile air compressors 2-5.4 m³/min
Small mobile air compressors 2-5.4 m³/min

Small mobile air compressors

Working pressure 7-12 bar (100-175 psi)
Free air delivery 2-5,4 m³/min (70-190 cfm)

Small mobile air compressors 3.7-6.6 m³/min
Small mobile air compressors 3.7-6.6 m³/min

Small mobile air compressors
Small mobile air compressors 3.7-6.6 m³/min
Made for tough circumstances
Our E-Air VSD compressors are green at heart, but have been built 
with the same robustness as their diesel counterparts.
• HardHat hood
• Fit for ambient temperatures of up to 50°C
• C3-certified body-work
• Water-cooled inverter
• Oil-cooled VSD drive train
• Permanent magnet motor features potted windings:
IP66 rating for protection against dust and water.

Small mobile air compressors 5-7 m³/min
Small mobile air compressors 5-7 m³/min

XAS 138-XAHS 108 (5-7 m³/min (188-237 cfm) / 7-12 bar (100-175 psi))


HardHat PE canopy, indestructible reliability
110% containment spillage-free frame
3-layer corrosion protection (Cat C3)
Easy to service, with spin-on filters and oil separators
Single axle for manoeuvrability

Mobile air compressors 8.7-16.8 m³/min
Mobile air compressors 8.7-16.8 m³/min

Mobile air compressors 8.7-16.8 m³/min

When the conditions get harsh, you need a canopy that protects
your investment. Our portable compressors boast the largest
HardHat available in the world, featuring a PE (polyethylene)
canopy that is exceptionally durable, lightweight, and resistant
to corrosion. This nearly indestructible canopy ensures your
compressor remains in top condition throughout its lifetime,
ensuring a high resale value.

To further enhance reliability, the compressors include an
IP 65-rated controller and smart electronics that automatically
manage warm-up and cool-down cycles. At the end of the day,
you need a compressor that you can rely on, even in extreme
ambient conditions (from -25 to 45°C (-10 to 122°F)).
Mobile air compressors 12.2-16.6 m³/min
Mobile air compressors 12.2-16.6 m³/min

XATS 288 - XAVS 238 (12.2-16.6 m³/min (430-587 cfm) / 7-14 bar (100-200 psi))
XATS 288 medium air compressor product image antwerp belgium

Efficient John Deere 4-cylinder engine for excellent performances
Single axle, lightweight design
1000 hour service interval
110% containment spillage-free-frame
3-layer corrosion protection (Cat. C3)
Large, gull-wing doors for easy service

Mobile air compressors 11.9-24.8 m³/min
Mobile air compressors 11.9-24.8 m³/min

Mobile air compressors 11.9-24.8 m³/min

If you have the power to choose,
choose electric
Atlas Copco’s range of E-Air compressors brings the benefits of electric-driven equipment to every possible workplace.
No emissions, efficient and ruggedized motors, low noise levels and a plug-and-play design; you can take the E-Air anywhere.
If you have an electric power supply at your job site, you can save good money using electricity instead of diesel, depending on
the energy prices. Emission-free and quiet, the E-Air is an environmentally-friendly and efficient source of compressed air.
All the components under its corrosion-resistant canopy are the result of time-tested technology, ruggedized for all
weather conditions. Every E-Air range is designed for easy service, with extended service interval of 2000 hours, or 2 years,
a spillage free frame and side drain plugs.
Mobile air compressors 16.9-37.00 m³/min
Mobile air compressors 16.9-37.00 m³/min

Mobile air compressors 16.9-37.00 m³/min

If you have the power to choose,
choose electric
Atlas Copco’s range of E-Air compressors brings the benefits of electric-driven equipment to every possible workplace.
No emissions, efficient and ruggedized motors, low noise levels and a plug-and-play design; you can take the E-Air anywhere.
If you have an electric power supply at your job site, you can save good money using electricity instead of diesel, depending on
the energy prices. Emission-free and quiet, the E-Air is an environmentally-friendly and efficient source of compressed air.
All the components under its corrosion-resistant canopy are the result of time-tested technology, ruggedized for all
weather conditions. Every E-Air range is designed for easy service, with extended service interval of 2000 hours, or 2 years,
a spillage free frame and side drain plugs.
Mobile air compressors 19-116 m³/min
Mobile air compressors 19-116 m³/min

Reduced drilling costs
The DrillAir compressors provide with working pressure up to 35 bar, allowing you to drill more meters per hour at a lower overall cost per meter.

Additional 10 % flow
With Dynamic Flow Boost you can reach faster flushing and refilling. And that means shorter time to complete the drilling job.

Save on transportation
Compact and portable design - one truck can carry both a compressor and a drilling rig thanks to the short 4.1 meter compressor frame