Oil-free scroll compressors F+ 1-6 SF+ 8-22
Related Products
Small mobile air compressors 2-5.4 m³/min
Small mobile air compressors
Working pressure 7-12 bar (100-175 psi)
Free air delivery 2-5,4 m³/min (70-190 cfm)
Small mobile air compressors 3.7-6.6 m³/min
Small mobile air compressors
Small mobile air compressors 3.7-6.6 m³/min
Made for tough circumstances
Our E-Air VSD compressors are green at heart, but have been built
with the same robustness as their diesel counterparts.
• HardHat hood
• Fit for ambient temperatures of up to 50°C
• C3-certified body-work
• Water-cooled inverter
• Oil-cooled VSD drive train
• Permanent magnet motor features potted windings:
IP66 rating for protection against dust and water.
Small mobile air compressors 5-7 m³/min
XAS 138-XAHS 108 (5-7 m³/min (188-237 cfm) / 7-12 bar (100-175 psi))
HardHat PE canopy, indestructible reliability
110% containment spillage-free frame
3-layer corrosion protection (Cat C3)
Easy to service, with spin-on filters and oil separators
Single axle for manoeuvrability
Mobile air compressors 8.7-16.8 m³/min
Mobile air compressors 8.7-16.8 m³/min
When the conditions get harsh, you need a canopy that protects
your investment. Our portable compressors boast the largest
HardHat available in the world, featuring a PE (polyethylene)
canopy that is exceptionally durable, lightweight, and resistant
to corrosion. This nearly indestructible canopy ensures your
compressor remains in top condition throughout its lifetime,
ensuring a high resale value.
To further enhance reliability, the compressors include an
IP 65-rated controller and smart electronics that automatically
manage warm-up and cool-down cycles. At the end of the day,
you need a compressor that you can rely on, even in extreme
ambient conditions (from -25 to 45°C (-10 to 122°F)).
Mobile air compressors 12.2-16.6 m³/min
XATS 288 - XAVS 238 (12.2-16.6 m³/min (430-587 cfm) / 7-14 bar (100-200 psi))
XATS 288 medium air compressor product image antwerp belgium
Efficient John Deere 4-cylinder engine for excellent performances
Single axle, lightweight design
1000 hour service interval
110% containment spillage-free-frame
3-layer corrosion protection (Cat. C3)
Large, gull-wing doors for easy service
Mobile air compressors 11.9-24.8 m³/min
Mobile air compressors 11.9-24.8 m³/min
If you have the power to choose,
choose electric
Atlas Copco’s range of E-Air compressors brings the benefits of electric-driven equipment to every possible workplace.
No emissions, efficient and ruggedized motors, low noise levels and a plug-and-play design; you can take the E-Air anywhere.
If you have an electric power supply at your job site, you can save good money using electricity instead of diesel, depending on
the energy prices. Emission-free and quiet, the E-Air is an environmentally-friendly and efficient source of compressed air.
All the components under its corrosion-resistant canopy are the result of time-tested technology, ruggedized for all
weather conditions. Every E-Air range is designed for easy service, with extended service interval of 2000 hours, or 2 years,
a spillage free frame and side drain plugs.
Mobile air compressors 16.9-37.00 m³/min
Mobile air compressors 16.9-37.00 m³/min
If you have the power to choose,
choose electric
Atlas Copco’s range of E-Air compressors brings the benefits of electric-driven equipment to every possible workplace.
No emissions, efficient and ruggedized motors, low noise levels and a plug-and-play design; you can take the E-Air anywhere.
If you have an electric power supply at your job site, you can save good money using electricity instead of diesel, depending on
the energy prices. Emission-free and quiet, the E-Air is an environmentally-friendly and efficient source of compressed air.
All the components under its corrosion-resistant canopy are the result of time-tested technology, ruggedized for all
weather conditions. Every E-Air range is designed for easy service, with extended service interval of 2000 hours, or 2 years,
a spillage free frame and side drain plugs.
Mobile air compressors 19-116 m³/min
Reduced drilling costs
The DrillAir compressors provide with working pressure up to 35 bar, allowing you to drill more meters per hour at a lower overall cost per meter.
Additional 10 % flow
With Dynamic Flow Boost you can reach faster flushing and refilling. And that means shorter time to complete the drilling job.
Save on transportation
Compact and portable design - one truck can carry both a compressor and a drilling rig thanks to the short 4.1 meter compressor frame